The solution of not charging the led flashlight
The solution of not charging the led flashlight
The led glare flashlight does not charge:
Reasons and solutions for the failure of charging led flashlights
1. The charger is damaged or the charger is incorrectly used
Strong light flashlights can light up, but you can’t charge explosion-proof flashlights when you see the electricity is fast to use. This kind of problem generally appears in the following problems.
1.1. The indicator light does not light up after the charger is plugged in;
1.2. When the charger is plugged in, it shows green, but the battery is not full. The flashlight (≤4.1V) still shows green in the charging hole of the strong light flashlight;
1.3. Use the wrong charger for a long time or use the wrong charger.
solution:
1.4. Plug the charger into other products of the same type to try to charge;
1.5. Touch the positive and negative poles of the charger for a short time to see if the indicator light changes;
2. The internal structure of the charging kit is faulty
The charger is good, but it can’t be charged. This kind of problem is rather confusing. How to remove the plug failure;
2.1. Check whether there is thick flying dust or debris in the charging hole, or the charging thimble is not in the center and cannot be contacted normally;
2.2. Remove the charging tail cover to check whether the internal wires are dragged down,
solution
2.3. Set the charging thimble to the positive and ensure that the positive and negative poles of the charger's charging head can touch.
2.4. Re-solder or reconnect the disconnected wires.
3. Charging can be bright, not charging can not be bright
Insert the charger into the charging hole and it can be used normally, but no matter how long it is charged, it will not light up or the light will be on for a short time as long as it is not charged;
3.1. Insert the charger into the charging hole and the strong light flashlight can light up normally, but the strong light flashlight does not light up or stays on for a short time without charging.
solution
3.2. This type of problem is usually caused by battery damage or battery aging, just replace the battery assembly.
The led glare flashlight does not charge:
Reasons and solutions for the failure of charging led flashlights
1. The charger is damaged or the charger is incorrectly used
Strong light flashlights can light up, but you can’t charge explosion-proof flashlights when you see the electricity is fast to use. This kind of problem generally appears in the following problems.
1.1. The indicator light does not light up after the charger is plugged in;
1.2. When the charger is plugged in, it shows green, but the battery is not full. The flashlight (≤4.1V) still shows green in the charging hole of the strong light flashlight;
1.3. Use the wrong charger for a long time or use the wrong charger.
solution:
1.4. Plug the charger into other products of the same type to try to charge;
1.5. Touch the positive and negative poles of the charger for a short time to see if the indicator light changes;
2. The internal structure of the charging kit is faulty
The charger is good, but it can’t be charged. This kind of problem is rather confusing. How to remove the plug failure;
2.1. Check whether there is thick flying dust or debris in the charging hole, or the charging thimble is not in the center and cannot be contacted normally;
2.2. Remove the charging tail cover to check whether the internal wires are dragged down,
solution
2.3. Set the charging thimble to the positive and ensure that the positive and negative poles of the charger's charging head can touch.
2.4. Re-solder or reconnect the disconnected wires.
3. Charging can be bright, not charging can not be bright
Insert the charger into the charging hole and it can be used normally, but no matter how long it is charged, it will not light up or the light will be on for a short time as long as it is not charged;
3.1. Insert the charger into the charging hole and the strong light flashlight can light up normally, but the strong light flashlight does not light up or stays on for a short time without charging.
solution
3.2. This type of problem is usually caused by battery damage or battery aging, just replace the battery assembly.
